First, P117 series thrust bearings have low cost, general strength and wear resistance, and are suitable for various submersible pump thrust bearings.
Second, the cost price of COP series thrust shaft is low, suitable for low-power low-lift submersible electric pump thrust bearing (thrust bearing outer diameter 85mm or more, power 11km head below 65m)
Third, the PTFE series thrust bearing has a moderate cost, which is the mainstream product used by submersible electric pumps, and is suitable for the lower thrust bearing of medium and high lift submersible electric pumps.
Fourth, S299 high-strength thrust bearing has high cost and is suitable for making the lower thrust bearing of high-power high-lift submersible electric pump.
Fifth, S299B high strength thrust bearing.
Sixth, S299G high wear resistance and high pressure resistance high-tech products.
Seven, M120H series graphite sintered bearings (graphite sintered impregnated epoxy resin) have low cost and are suitable for guiding bearings for various submersible pumps below 18.5KW.
Eight, M120B series graphite sintered bearings (graphite sintered impregnated babbitt) cost is high, 18.5KW above the guide bearings of various submersible pumps and various high-power, high-lift submersible pump thrust bearings.
Nine, M102B (asbestos iron) has a high cost and is suitable for guiding bearings for submersible electric pumps above 18.5KW.
