Precautions for copper-based inlaid self-lubricating slide plate:
1. The specifications and dimensions of self-lubricating slide plate are customized according to the user's drawing.
2. The surface roughness of the installation base surface of the self-lubricating slide plate should be less than Ra3.2μm, and the base surface accuracy should meet the requirements of the total installation accuracy of the relevant parts of the machine tool or mechanism.
3. The surface roughness of the guide rail surface of the self-lubricating slide plate should be less than Ra1.6μm, and when it is necessary to open the oil groove and drill the oil hole on the guide rail surface of the grinding, the burr should be strictly removed.
4. The surface of the self-lubricating slide plate can also be customized with oil groove and oil hole as required.
5. Fixing method of self-lubricating slide plate:
(1) Bonding and fixing: After cleaning and drying the bonded surface, evenly apply polyurethane adhesive or pressure-sensitive adhesive to the place to be bonded, put the guide rail plate and grinding parts, and cure under pressure. Or use double-sided tape with precision to fix, it will be more convenient and fast;
(2) Screw fixing: fixed with copper countersunk screws (generally M4), the screw surface should be lower than the working surface of the guide rail plate 0.20mm;
(3) Baffle fixing: fixed with a baffle plate at both ends of the direction of movement.
(4) Fixation of screws at the same time as bonding: suitable for mechanisms with pulsating fatigue loads.
