KSOB650-SH Iron Solid-lubricant Embedded Bearing

KSOB650-SH iron solid-lubricant embedded bearing with graphite ring

steel Gcr15 the basis and embedded with solid lubricant. It is a typical material saving product. The product can be used as a substitute of  KSOB650-B if the pressure is <145N/mm² or the requirement in mechanical performance is not high, to greatly reduce the cost and meet the use requirements.It can be used in fields such as guide post of mold, mold-frame of plastic injection machine.

Feature
1.A typical material saving product
2.Cost effective, it can substitute JDB-2 if the pressure is <145N/mm² or the requirement in mechanical performance is not high

Application
1.Guide post of mold
2.Mold-frame of plastic injection machine

Technical Parameter

Base material: GCr15

Ultimate dynamic load: 60N/mm²

Base hardness: HRC58~60

Friction Coef. μ: 0.04-0.18

Max operating temperature: 400℃

Max sliding speed: 0.5m/s

< Prev

Hot Tags: ksob650-sh iron solid-lubricant embedded bearing, China ksob650-sh iron solid-lubricant embedded bearing manufacturers, suppliers, factory, drill bit guide bushing, 16mm router guide bushing, 13mm guide bush, teflon slide plates, router guide bushings, material equivalent