Products

Definition Bimetal bushings are a kind of sliding bearing components made of two different metal materials composite, usually low carbon steel as the substrate, the surface sintered or composite

Definition The bimetal bushing is a cold steel matrix with sintered copper-lead alloy and aluminum-tin alloy bimetal bushing. The surface of the shaft sleeve is designed with oil hole oil groove to

Definition FB090 bronze bearing, using special formula of high-density copper alloy strip as the matrix, the surface can be rolled diamond or hemispherical oil holes and oil grooves according to user

Core advantage Maintenance-free design: PTFE/ graphite composite layer provides continuous lubrication and eliminates frequent oiling Ultra-high wear resistance: The special sintering process reduces

Bimetallic plate usually refers to **a composite plate made of two different metals or alloys**, which are combined together through specific process methods to give full play to their respective

CuSn7Zn4Pb7 Cast Bronze Bushing Gunmetal Centrifugal Solid Bronze Bearing

Cast iron guide plate with HT250 cast iron as the base material, according to the working conditions according to a certain proportion of the working face machining holes and filled with solid

BL (copper-based), BL-A (aluminum), BL-P (polymer plastic base) to keep the ball solid, respectively, copper alloy, hard alloy, POM resin matrix, and on its outer surface, processed orderly,

KSOB650-SH iron solid-lubricant embedded bearing with graphite ring steel Gcr15 the basis and embedded with solid lubricant. It is a typical material saving product. The product can be used as a

KSOB650-W copper alloy water-lubricating bearing Structure: Aluminum brass base-- embedded with modified PTFE(SL4) Feature 1.Good anti-friction and wear-resistant effect with PTFE as lubricant,

Structure: Low carbon steel base – casting bronze embedded with graphite and MoS2 (1-2mm) Feature 1.Save material cost 2.With low-carbon steel base, the product has better impact resistance comparing

The RAM-HT sleeve bushing is made of high quality 65Mn spring steel as the basic material. After pressing the spring steel plate, it is rolled with a high-strength forming mold. The inner part of the