China meehanite guide bushing Manufacturers Factory Suppliers

CODE: JSLSD52-38.2-15. Die set cam unit was made by high-precision equipment five-axis machining center, wedge mechanism is a mechanical mechanism that changes vertical motion into horizontal motion

1. Material: bronze+graphite 2. Specification: Customized 3. Major markets: Europe, the United States, Southeast Asia, India, Russia, South Korea, etc. 4. Packaging specifications: Carton, wooden box

1. Material: bronze+graphite 2. Specification: Customized 3. Major markets: Europe, the United States, Southeast Asia, India, Russia, South Korea, etc. 4. Packaging specifications: Carton, wooden box

Cast iron guide plate with HT250 cast iron as the base material, according to the working conditions according to a certain proportion of the working face machining holes and filled with solid

CODE: KSOB650B. ​KSOB650 NAAMS standard bushing is a kind of self lubricating brass bushings. Self-lubricating, high strength copper alloy with solid lubricates plugs, machining as standard request.

CODE: KSOB-RVGB VW code 39D995. Graphite sleeve bearings is made of cast bronze alloy base material with special solid lubricants plugged. The base metal withstands high load and the graphite provide

CODE: KSOB-RCLP. Clamps for bushes and guides posts material follow 1.0301. Used for 39D860 bushing,

KSOB-RCSHW 39D894 CAMS DWELLS VDI 3357 Cam stroke bronze plate. Our cam component series products cover the top (bottom) slide plate, inclined contract active plate, convex V plate, forced reset

KSOB-RCSHS 39D894 CAMS DWELLS VDI 3357 Cam stroke STEEL plate. Our cam component series products cover the top (bottom) slide plate, inclined contract active plate, convex V plate, forced reset block

RCBP 39D952 CAMS DWELLS VDI 3357 Cam Bottom plate. Our cam component series products cover the top (bottom) slide plate, inclined contract active plate, convex V plate, forced reset block and so on.

CODE: JSUCD52-58.5-70. Tools mechanical cam units（die cam unit）, used for many drilling, forming, shearing and cutting applications in metal work. They can be mounted horizontally or inclined.

CODE: cam unit JSUCD52-58.5-70. Low-cost CAM-Unit for punching and bending operations, High Rigidity with Box Structure