China router bushings Manufacturers Factory Suppliers

CODE: JSLSD52-38.2-15. Die set cam unit was made by high-precision equipment five-axis machining center, wedge mechanism is a mechanical mechanism that changes vertical motion into horizontal motion

1. Material: bronze+graphite 2. Specification: Customized 3. Major markets: Europe, the United States, Southeast Asia, India, Russia, South Korea, etc. 4. Packaging specifications: Carton, wooden box

1. Material: bronze+graphite 2. Specification: Customized 3. Major markets: Europe, the United States, Southeast Asia, India, Russia, South Korea, etc. 4. Packaging specifications: Carton, wooden box

1. Material: bronze+graphite 2. Specification: Customized 3. Major markets: Europe, the United States, Southeast Asia, India, Russia, South Korea, etc. 4. Packaging specifications: Carton, wooden box

BL (copper-based), BL-A (aluminum), BL-P (polymer plastic base) to keep the ball solid, respectively, copper alloy, hard alloy, POM resin matrix, and on its outer surface, processed orderly,

​COD: KSOB-650F. This kind oilless bushing was made by high strength bronze material insert solid lubricates.. The bronze material basic on C86300.HBSC4. CAC304 standard. Also we called them as self

CODE: KSOB650. Press die guide bush typeSelf lubricating guide bushing is made of cast bronze alloy base material with special solid lubricants plugged.

CODE: RTWP10 WEAR PLATE SELF-LUBRICATING. RTWP wear plates consist of highly wear-resistance copper cast alloy whose sliding surfaces are evenly provided with a certain percentage of solid lubricant

CODE: KSOB-RCLP. Clamps for bushes and guides posts material follow 1.0301. Used for 39D860 bushing,

RCBP 39D952 CAMS DWELLS VDI 3357 Cam Bottom plate. Our cam component series products cover the top (bottom) slide plate, inclined contract active plate, convex V plate, forced reset block and so on.

CODE: JSUCD52-58.5-70. Tools mechanical cam units（die cam unit）, used for many drilling, forming, shearing and cutting applications in metal work. They can be mounted horizontally or inclined.

CODE: cam unit JSUCD52-58.5-70. Low-cost CAM-Unit for punching and bending operations, High Rigidity with Box Structure