China mould guide components for sustainable molding Manufacturers Factory Suppliers

CuSn7Zn4Pb7 Cast Bronze Bushing Gunmetal Centrifugal Solid Bronze Bearing

Product Overview The high-pressure brass-in-matrix graphite self-lubricating guide sleeve is a core standard component of the precision mold guiding system. It is made of ZCuZn25Al6Fe3Mn3 (High-Li

1. Material: steel+bronze 2. Specification: Customized 3. Major markets: Europe, the United States, Southeast Asia, India, Russia, South Korea, etc. 4. Packaging specifications: Carton, wooden box 5.

1. Material: bronze+graphite 2. Specification: Customized 3. Major markets: Europe, the United States, Southeast Asia, India, Russia, South Korea, etc. 4. Packaging specifications: Carton, wooden box

1. Material: bronze+graphite 2. Specification: Customized 3. Major markets: Europe, the United States, Southeast Asia, India, Russia, South Korea, etc. 4. Packaging specifications: Carton, wooden box

1. Material: bronze+graphite 2. Specification: Customized 3. Major markets: Europe, the United States, Southeast Asia, India, Russia, South Korea, etc. 4. Packaging specifications: Carton, wooden box

KSOB650-SH iron solid-lubricant embedded bearing with graphite ring steel Gcr15 the basis and embedded with solid lubricant. It is a typical material saving product. The product can be used as a

CODE: KSOB-RVGB VW code 39D995. Graphite sleeve bearings is made of cast bronze alloy base material with special solid lubricants plugged. The base metal withstands high load and the graphite provide

CODE: KSOB-RSEW20 39D863. KSOB-RSEW20 Volkswagen standard 39D863 is made of cast bronze alloy base material with special solid lubricants plugged. The base metal withstands high load and the graphite

CODE: KSOB-RCUPW. 39D890 WEAR PLATE VDI 3357 SELF-LUBRICATING sinter bronze wear plate

RSTLW 39D582 L GIBS VDI 3357 WEAR PLATE SELF LUBRICATING. Our cam component series products cover the top (bottom) slide bronze wear plate, inclined contract active plate, convex V plate, forced

CODE: cam unit JSUCD52-58.5-70. Low-cost CAM-Unit for punching and bending operations, High Rigidity with Box Structure